Updated June 21, 2025
| Home
| Amplifiers
| Speakers
|
| Vacuum Tubes
| Education
| Support
| Contact
|
The Wright Audio
LT-6P Stereo
Control Tube Preamplifier
| Audio signals at the
source components are
at their most delicate. It's at this earliest stage where tube-type
pre-amplification seems to best preserve the signal's integrity.
The Wright Audio LT-6P not only maintains signal integrity but also allows for Bass and Treble adjustment due to the wide variety of tonal balances in today's digital component and internet sources as well as the past's analog vinyl recordings. The carefully-implemented Bass and Treble Controls in this preamplifier are passive. Other than the controls themselves and very few associated passive parts, there are no other devices in the signal path. They work in the more extreme ends of the frequency spectrum without negative effects in the midrange. This approach is unlike traditional 'active' feedback-type controls which require an additional amplification stage in the signal path and its associated distortions which have given many audiophiles reason to dislike these controls. The passive controls allow the tubes to operate in an improved, better-sounding gain range. This preamplifier actually sounds better than many which do not have them when the controls are set to the 'Flat' position. The preamplifier uses a vacuum tube, filtered power supply operating at less than one-sixth of its capacity to maintain the purity of the signal. There are no solid-state devices in the preamplifier with the exception of the tube heaters' power supply. Also, there are no circuit boards which allows for the possiblity of circuit and parts upgrades in the future with relative ease. The capabilities of handling up to six inputs, two fixed-level outputs and two independently powered and isolated variable outputs provides maximum versatility for any installation. Yet installing and using the preamplifier is completely intuitive. With no displays requiring power, the front panel settings are visible from a few feet away even with the power off. Although the LT-6P Preamplifier is electrically compatible with most solid-state power amplifiers, it is important to note that maximum benefit will be achieved when the LT-6P is paired with the electrically and sonically matched Royale SE Single-Ended Stereo Power Amplifier or a pair of the monaural Wright Audio Oasis Power Amplifiers. As a set, they offer the dynamics, soundstage dimensionality, nuance and clarity which make listening to music the indescribable joy it should be. |
FEATURES AND SPECIFICATIONS
|
LT-6P CONTROL PREAMPLIFIER
PRICE
$2250
Continental U.S. Shipping $95
Total - $2345
IN STOCK
TO ORDER OR FOR A
CONSULTATION
Contact:
inform@WrightAudioArts.com
| Home
| Amplifiers
| Speakers
|
| Vacuum Tubes
| Education
| Support
| Contact
|